Search

A Little More Abstract

Crafting For Those Dedicated to Experimentation

Category

Finishing

A Study in Wool Part 1

I have been having a blast sorting thorough my stash (taking a quick break from another project).  While doing so I ran across a sampler kit I had purchased with different wool breeds inside.  All of the wool samples were washed, but they were still in their lock formation.  To simplify things, and make sure that the preparation and spinning was not different for each type, I decided to card them and spin from the resulting rolags.  The end products (once spun) were interesting.  I’ll show you as I go, after letting the yarn rest a day (and clearing off a bobbin to spin with) I navajo/chain plied the yarn to keep the breeds separate.  I also spun a bit of a commercially prepared merino in between most of the breeds.

This is my bobbin before this concept seeped into my mind.  I started with some BFL (Blue Faced Leicester) a breed that most people rhapsodize about.  I have spun commercially prepared top BFL before and enjoyed it.  This fiber has a very soft hand, though this sheep must have had some tender tips or something because I wound up with some nepps in my rolags.  Rather than risk more appearing I stopped after 2 passes each rolag.  I did smooth this fiber down as I spun it (which should result in a less springy washed yarn).

The Lincoln had a well defined lock structure but once it had been carded the resulting wool was semi coarse.  This batch did not have many nepps, and actually carded out to pretty, lofty rolags.  I did not smooth this down much while I was spinning.

The Adult Mohair was a nightmare.  This batch had less than 1″ staple length and the guard hairs were still present.  This gave everything a slightly coarse feel but still quite silky.  The main problem is that when spinning the very short fibers either clump together resulting in huge bumps or fall out altogether resulting in a huge mess.  I nay be entirely wrong but I would like to say that the blame is either with the producer (it isn’t a very good fiber animal) and the seller that sold me such messy, useless fiber.  If you have the patience for it and a dropcloth under your wheel this might be usable.  I believe I will see if anyone can use it for felting, or something.

The very first thing I have to say about this Cross Breed fiber is: Whatever was used to wash this smells very sweet!  The fibers are springy and medium soft.  I would not use this as a next to the skin product like socks or a sweater but it might make a decent scarf.  Something you wear for a short while and then take off.  Maybe mittens?  Oh well, I did not smooth this down at all while I was spinning.  I am discovering that since I am not smoothing things down, I have a harder time getting an even yarn.  When I do what I see others doing, spin and then gently pull to pull out the bumps I just wind up with thin spots.  Something else to work on!

The English Gotland fibers had two different types of fibers.  The long springy gray fibers and the shorter less springy white fibers.  It carded beautifully but the differences in staples seemed to result in little clumps of fiber sticking up and falling out.  I did not smooth this as I went so it will be interesting to see how this washes up.

The Icelandic and Romney both carded up beautifully, the Romney seemed to have a lot more loft than the Icelandic.  Neither had many nepps but also neither spun up completely smoothly either.  Possibly an error of the operator rather than a fault of the fiber.  Neither seemed soft enough for next to the skin projects.  I did not smooth them down while spinning.

I had some Llama Fiber and Cashgora that I spun up as well.  I did not bother carding either of these fibers.  There was not enough Llama to bother and I felt that my hand cards would be too coarse to process the Cashgora.  Both of these fibers spun like a dream, the Llama was a little sticky (Probably due to processing oils).

I cannot wait to see how all of these fiber will turn out in the end.  I will say that one of the fibers, the English Gotland I believe, wound up splitting in a place and had to be tied back together resulting in a flaw in the skein.  This skein and the other that I plied to make room for the bobbin have both been soaked for an hour or so.  They are both hung up to dry and I cannot wait to see what they will look like when I dry.  (I also have some fiber drying that I washed and rinsed very thoroughly.  It came to me a bit sticky and so I hope it was lanolin that I have succeeded in washing off.  I only did about half of the batch if this does not work, or felts the fiber, I will have to see what else I can do.)

Happy Crafting, more information about the skein of samples and the sticky fibers in the next episode.  Dun, Dun, Dun.

2 Ply Silk

finished-silk

On the left is my finished Monet Silk and on the right is some gold silk I  had lying around.  Both are 2 ply and just beautiful, the camera does not do their luster justice.  The Monet wound up being 32 yards and the gold just over 40 yards.  I am not sure what I am going to do with them yet though it will have to be something pretty special.

I love spinning silk, as soon as I get through this minor bout of obsession I am going to try and translate these skills to spinning my wool with a finer, tighter hand for weaving.

Happy Crafting

Facebook Fiber Find Pt. 3

I am having an absolute ton of fun with my facebook fiber find.  Admittedly the quality is not quite what I expected, but the colors more than make up for it.  I am finding quite a bit of the fiber to be rough and in some cases sticky.  The locks pull apart and are a bit course to work with, but I am pressing on!

I turned the locks into a big pile of fluff that I then spun into 2 singles that I then plied!  This resulted in a coarse 2 ply yarn, about 64 yards, that I hope to make into a hat at some point, or weave into something!

IMG_0756

Once I had the fluff carded out it was a ton of fun to spin the fiber.  Look how pretty it is after being washed!IMG_0757

I think that this would make a great hat, or something similar.  I would want to be able to show the colors off, but it is not a good fit for a piece intended to be worn next to the skin.

Happy Crafting!

Dying to get started

These are the results of my Kool-Aid experiment.  They were created from the wool I had received with my Schacht Wheel (I’m not really sure what it is).  A very pretty wool that did not felt on me when I tried this!  I put 3 Kool-Aid lemonaid packets into a plastic shoe box with about 2-4 oz of wool (I do not have a kitchen scale so it is all estimated).  I then poured enough water to cover the wool and added about 10 drops of food coloring.  The resulting fiber was the fire orange color.  After letting it set for about 30 minutes I took it out and began to rinse the fiber.  A lot of the dye started to come out of the fiber as I was rinsing.  Since I feared losing the beautiful color I decided to use some vinegar to soak the fiber and retain the color, after a 15 minute soak and a thorough rinsing the color remained and the fiber didn’t even have a vinegar stink.

There was a lot of dye left in the water so I decided to throw more fiber into it, again somewhere between 2-4 oz of wool, and another packet of lemonaid kool-aid to help things set.  It soaked for about 30 minutes and when rinsed created the beautiful yellow that can be found in both skeins.

I think that kool-aid (helped along with some food coloring if needed) is a great introductory method to dying.  I look forward to more experiments in the future, but some fiber is calling my name to be spun!

Happy Crafting!

Jungle Rug

Jungle Rug

Sorry it has been a while since I last posted, some things have been happening and I have not found the time.

This is the project that I spent the summer working on.  It is a latch hook rug, the seams are sewn with rug thread, a rubber backing was painted on and it was finished with a non-skid backing glued on.  The latch hooking took over 85 hours, and about a week of sewing, painting, and drying time for the finishing.  It was a lot of work but a lot of fun as well. This is the first really big project that I managed to complete.  I purchased a finial rod to finish things off and gave this as a gift.  Mom is holding the rod up behind the rug.

Going Batt-y

This past week I decided to use my bottom whorl spindle to spin up a couple of mini-batts I purchased from Woolie Bullie out of Kansas, purchased through Etsy.  The first batt started out looking like this:

IMG_0311 IMG_0312

These are two views of the same batt.  I split this batt into two halves and spun two singles.  I wound the singles onto (clean) chopsticks and plied them from there.  The plied yarn on the spindle looked like this:

IMG_0314

Then I used my Niddy Noddy to measure the yarn:

IMG_0316

This first 1/4 oz batt gave me 17 yards, all of the design elements that caused this to be less than a ‘perfect spin’ are my own and I love them!  I then cast on 20 stitches and using a stockette stitch on US9 needles I started knitting:

IMG_0317

This is after 17 yards, well I love it and so I spun up the second batt:

IMG_0318 IMG_0319

Which yielded about 16 yards.  I have that knit up but could not stop there!  I am currently waiting with baited breath for my next Batt from WoolieBullie.  So exciting, I hope that there will be enough to make a very nice scarf or cowl.  I believe that when I finish knitting and wash the product, gently with Dawn, the finished knitted fabric will full out a bit and cause the absolute end product to look a bit different from this beginning.

For the WoolieBullie Dingbats, I highly recommend them.  My first batt spun very quickly and easily, while it looked like there was a lot of white the end product was very colorful.  There seemed to be a bit of a sticky substance on my second batt, but I believe that this is the result of having a few beautiful curly locks in the fiber and just surprised me instead of detracting from my spinning experience (obvious since I am getting another batt!).

Create a free website or blog at WordPress.com.

Up ↑