Search

A Little More Abstract

Crafting For Those Dedicated to Experimentation

Category

Babe’s Fiber Garden

Spindle Experiments

IMG_1216

I love my Bottom Whorl Drop Spindle, the wooden one in the middle.  This is what I started with, adn I adore it.  I can get a good long spin, it looks cool twirling around and the hook at the top is perfect for catching on when I’m twisting my fiber.

IMG_1218Unfortunately within the concept of larger classes and getting people hooked on fiber arts, the price point is a little high for a giveaway.

On the left is a Babe Spindle without the whorl.  I needed to hit a price point to get free shipping on an order, the Babe Spindle cost less than shipping and allowed me to hit that goal so I ordered one.  It really is a neat spindle, allowing the user to decide if it is a bottom whorl or top whorl spindle in addition to allowing you to decide if you want to put one or two of the whorl discs on the spindle.  What I found neat is that if you keep the whorls off of the spindle entirely…or if they fall off because you didn’t put nearly enough tape on the shaft, oops, you can roll the shaft of the spindle down your leg and use the cup hook to hold the wool in place.  IMG_1219The shaft becomes a great little spindle, a bit awkward and no independent spinning like with my original spindle, but you have a lot more control over how the shaft spins, very neat.   This becomes a bit more of a reasonable price point, all a teacher would need to provide is a stick (dowel) with some cup hooks screwed into the top.  (also Wool)  Dowels are not that expensive, the cup hooks aren’t too bad price wise…I’d just have to find a way to get the cup hook into the dowel without it splitting.  I think I saw something about putting a nail in first to keep the wood from splitting, definitely worth considering.

Now, recently Mayan Spindles, I can’t really find out where the name came from as it does not seem to have anything to do with the Mayan Culture, have been showing up more in popular culture…okay, popular spinning culture.  This is a dead simple way of putting twist into fiber, attach the fiber on one arm, spin around, and voila yarn.  The spinning motion is very big and completely controlled by the spinner.  But the price point just went up again, a wooden Mayan Spindle (Spinner) is about $20, whew that’s a bit rich for a teacher.  However, doesn’t that spinner look a bit like a propeller?  I looked up plastic propellers on Amazon, lo and behold, they have 12 plastic propellers in a pack for under $5 with free shipping. IMG_1217 Okay, they came from China, and I’m washing them in hot soapy water before using because I’m a little paranoid.  (I didn’t realize that the Sari Silk from India might contain some really nasty diseases that are fairly rampant over there).  I try to Order American when I can, if you know of an American equivalent/retailer let me know, but these are fantastic.  They spin, just a tiny bit, on their own but allow for complete control.  They are lightweight and easily spun in one hand.  It is very easy for the spinner to see the twist as it enters into the fiber.  At about .25 each, they are cheap enough to be a giveaway that doesn’t hurt the pocket book.  I do think that I will glue the shaft to the propeller before showing these to anyone else, but it really does make for a great spindle alternative.

So, these are my Spindle Explorations!

Happy Crafting!

Spinning Cotton

linten-spindel-babe-2016

The linten spindel by Babe’s Fiber Garden is just phenomenal. Easy to put together, and once you get along with its quirks, it is very easy to use. As you might remember I was hoping to use this as a bobbin winder and it isn’t a great bobbin winder if you just put the bobbins on the knitting needle that makes up the spinning tip. Babe’s Fiber Garden does sell extra spindles in groups of three at a $60 cost, which is still half the price of a bobbin winder but since the Spindel already cost over $100 I am spending a fortune to save a bit.  I did find out while trying my hand at spinning cotton (I’m not good yet) that once I managed to spin an itty bitty cop I had enough fiber on the spindle that I could jam two different sizes of bobbins down and be able to wind onto the bobbins. Essentially the bobbins need to stay still on the spindle so that they twist when the spindle twists which is how the fiber winds onto the bobbins.  The third brand of bobbin just seems a bit too large for this device, but I will try a few other options. Of course now I’m afraid to spin any more cotton lest I lose my proper sized cop, lol. I am using my iPad with heavy cover, it’s five years old do a much heavier version, to weigh down the wheel since I am quite enthusiastic in my spinning.

Since I wrote this post yesterday, I couldn’t resist spinning more cotton.  I watched the Building Blocks of Spinning Part 2 with Sarah Anderson and she mentioned mentioned 8 ply cabled cotton makes good wicks, so now I am interested in making a bit of cotton and cabling it before Spinzilla starts Monday Morning.  To my way of thinking if I get this spun and cabled between today and tomorrow I can start my cotton fresh to create a cop to hold my bobbins for spinning.  I must admit if I make even half of the yarns I have pictured then I will have accomplished quite a bit this upcoming week.

Happy Crafting!

Shuttle Bobbins? What?

I was watching “Get More Spun: Part 1” by Abby Franquemont on CraftDaily.com video subscription service when Abby mentioned storing singles on several bobbins to ply from later.  She stated that storing singles on several different bobbins and mixing them up before plying will help to even out some uneven spinning.  I saw the bobbins she was storing them on and it clicked, those are shuttle bobbins not spinning wheel bobbins!  I will admit to still having some apprehension about how many joins might be needed for these yarns, but my excitement is far outweighing any misgivings.

This did bring about another potential sticking point, I do not have a bobbin winder.  I picked up an attachment for my cordless drill but between my underpowered drill and my inability to get the bobbin far enough down the shaft so that I feel comfortable putting pressure to wind a nice tight yarn onto the bobbin, my winder is not going to cut it.  I looked at bobbin winders, over $100 each!  Fiber tools are so very expensive, and often for something that can only be used for a single purpose.  As Alton Brown would say, “Unitaskers!”

I sighed, pouted, and decided to see if any of the sites online (Ebay, facebook fiber tools groups, etc) had a bobbin winder that I could get at a price I was willing to pay.  In my travels I looked at the charkha a tool used for spinning cotton that Ghandi popularized in India to help free his people (it really is a fascinating subject that I intend to dedicate at least one post to in the near future).  The Ashford version looked sort of like an amped up bobbin winder, but at almost $400 it would be an even sillier investment than the Unitasker!.  However, there was another option a Babe Linten Spindel Charkha Wheel. At $150 it is not less expensive than buying a bobbin winder, and it could be argued I could get a book Charkha and a bobbin winder for about the same price, I am very happy with my purchases.

Babe’s Fiber Garden was amazing at helping me figure out if using their wheel as a bobbin winder would be a reality or not.  They even offered to send me some bands that are used for animal castration thinking that these will be a good size to keep my bobbins on their spindle.  I really look forward to playing with my new Mulit-Tasker as soon as it gets here!  I have some cotton left over from last year when the Cotton Clouds kit was on clearance from Woolery, but this playing might have to wait until Spinzilla is over!

I may even get time over the next year to tell Babe’s Fiber Garden that their new Garden loom looks like it would be good for Sprang!

Happy Crafting!

Create a free website or blog at WordPress.com.

Up ↑